Repositorio Institucional de la Universidad Alfonso X el Sabio

In vitro analysis of the influence of the thermocycling and the applied force on orthodontic clear aligners

Mostrar el registro sencillo del ítem

APA

Cintora López, Patricia & Arrieta Blanco, Patricia & Martin Vacas, Andrea & Paz Cortés, Marta Macarena & Gil, Javier & Aragoneses, Juan Manuel .In vitro analysis of the influence of the thermocycling and the applied force on orthodontic clear aligners.

ISO 690

Cintora López, Patricia & Arrieta Blanco, Patricia & Martin Vacas, Andrea & Paz Cortés, Marta Macarena & Gil, Javier & Aragoneses, Juan Manuel. In vitro analysis of the influence of the thermocycling and the applied force on orthodontic clear aligners.

https://hdl.handle.net/20.500.12080/39394
dc.contributor.author Cintora López, Patricia
dc.contributor.author Arrieta Blanco, Patricia
dc.contributor.author Martin Vacas, Andrea
dc.contributor.author Paz Cortés, Marta Macarena
dc.contributor.author Gil, Javier
dc.contributor.author Aragoneses, Juan Manuel
dc.date.accessioned 2024-01-29T16:03:25Z
dc.date.available 2024-01-29T16:03:25Z
dc.date.created 2023-12
dc.identifier.uri https://hdl.handle.net/20.500.12080/39394
dc.description.abstract The mechanical properties of polyurethane dental aligners have been studied in an oral environment at 37°C and subjected to thermal cycling between 5°C and 55°C for long periods of time at different mechanical stresses. The aim is to determine the efficacy of the orthodontic aligner at different stress levels, the effect of thermal cycling with therapy time on tooth position correction. Sixty aligners with the same design were studied applying tensions of 0, 3 and 30 N and determining the deformation at different times from 1 to 760 h. Half of these aligners were subjected to stresses submerged in artificial saliva at 37°C and the other half were subjected to thermal cycles between 2°C and 55°C in salivary medium. Deformation was determined using a high-resolution stereo magnifier and ImageJ image analysis software. Water adsorption by the polyurethane was determined at the different test times. The results showed that in the unloaded aligners there is no appreciable deformation, but with thermal cycling there is a light shrinkage of the aligner due to the semi-crystallization process (ordering of polymeric chains) of the polyurethane. When applying loads of 3 and 30 N, creep curves with constant deformation transition zones can be seen. The transition zones decrease as the applied mechanical load increases. In addition, the significant effect of thermal cycling on the reduction of the transition zone of the aligners has been demonstrated. The transition zones are optimal for dental correction as constant stresses are exerted for tooth movement. The effect of thermal cycling shortens the constant deformation zone and reduces tooth alignment time. It was observed that the absorption of water in the aligner is constant after 1 h of immersion and does not exceed 0.4% by weight of absorbed water. KEYWORDS polymers, orthodontic appliances, removable, clear aligner appliances, mechanical properties, cree es_ES
dc.format application/pdf es_ES
dc.language eng es_ES
dc.rights CC-BY es_ES
dc.rights.uri http://creativecommons.org/licenses/by/4.0/deed.es es_ES
dc.title In vitro analysis of the influence of the thermocycling and the applied force on orthodontic clear aligners es_ES
dc.type info:eu-repo/semantics/article es_ES
dc.rights.accessrights info:eu-repo/semantics/openAccess es_ES
dc.identifier.location N/A es_ES


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

CC-BY Excepto si se señala otra cosa, la licencia del ítem se describe como CC-BY

Buscar en DSpace


Listar

Mi cuenta

Social Media